Construction of Avalon Pontoon Boats
Exclusive Heavy Duty Features
- Avalon’s exclusive Matrix 50 heavy-duty 50 gauge marine seat covering with 24% substructure, when compared to competitors, is proven most resistant to rips, holes, and stains.
- New Herringbone multi-directional stretch backing promotes quicker recovery
- Heavy duty stitching on all fabric
Exclusive Aluminum Seat Frames and Kick Panels
Aluminum seat frames are stronger and provide more storage space than plastic. Plastic frames often crack and hold water, but aluminum frames do not. And not only is there more storage space in aluminum seat frames, but the space is more effective. Our aluminum seat frames have Flo thruTM ventilation so your equipment will dry even if the storage area is closed, and also mildew and fungus are much less likely to occur. Because our aluminum seat frames are so superior, they come with a lifetime warranty, guaranteeing the frames will be successful forever.
Heavy-Duty Nose Cone with First Integrated Splash Fins in the Industry
Our nose cones and splash fins are the absolute strongest in the industry. In fact, with a thickness of 0.100”, double wrapped leading edge, and one-piece construction, it is nearly impossible to break one of our splash fins off. They’re so strong, they’re practically invincible.
Super-Strong Double Full Pontoon Connectors
Unlike our competitor’s “small but skirted” riser connectors, the majority of our pontoon boat models feature full riser pontoon connections on the inside and outside. Our connections fortify the pontoon for continuous strength along its whole length.
Exclusive DECO Series Side Keel Protection
Exclusive Interior Drain
Avalon exclusively now includes a drain in the corner of the rear bench that releases water through a drain channel and off the boat. This prevents the otherwise common accumulation of rainwater on the seats that cause stains in the corners over time.
Carbon Canister Flow-Through Gas Fill
We alone, among our competitors, have managed to solve the problem of fuel fill splash back and slowness. Our exclusive carbon canister flow-through eases pressure out of the tank, thereby eliminating splash back and allowing for quick fueling & automatic fueling shutoff.
Reflective Safety Striping
Strongest Double Bolted Motor Pod Assembly in the Industry
The entire assembly is made 0.190” thick with integrated splash. The 2” thick aluminum-sheathed transom is fully welded, and the whole ensemble is double bolted with at least 16 3/8” bolts for maximum durability. Besides that, our pod is supported by more heavy-duty “C” channel crossbeams than any other motor pod in the industry.
Exceptional Pontoon Tubes
Our pontoon tubes are made with an incredible 0.090” thickness of H5052 marine aluminum alloy. The strength of the material itself is augmented and air-locked by multi-baffling near each weld. And every weld is done by hand, held up to incredibly strict standards, ensuring every pontoon tube is of the highest quality possible.
The Best in Crossbeam and Deck Construction
Our Deco Series pontoon boats model every cutting-edge heavy-duty hull feature. Using heavy-duty stainless bolts, nuts, and washers, 3” extreme thickness “C” channel crossbeams are attached to the full riser. On top of the crossbeams, our 2/4”, pressure-injected, lifetime guaranteed flooring is bolted down with the finest quality stainless steel bolts and fastened permanently with stainless nylock lock nuts and washers. The result is nothing less than fantastic.
Extra-Solid Bow Eye
Comments are closed.